NEWS & BLOGS

Benefits of Synthetic Oil

What is Synthetic Oil?

Synthetic oil has come a long way since its introduction during World War II. Back then, it was developed as a substitute for conventional oil or mineral oils, which were scarce. Mineral-based or traditional oil is refined crude oil. On the other hand, synthetic oil undergoes a more complex process that results in a cleaner, more efficient product.

• Synthetic Oil Defined: Synthetic motor oil is a man-made lubricant consisting of artificially modified chemical compounds, typically derived from chemically modified petroleum components or other raw materials. Simply put, synthetic oil is a lubricant consisting of artificially made compounds rather than whole crude oil.

Today, synthetic oil is preferred by many for its superior qualities and advanced protection for engines. But synthetic oil is not only for cars. It’s also used in industrial machines, jet engines, and even some gardening tools. Its broad application is due to its ability to function well under extreme conditions.

Synthetic Motor Oil in Engines

Once in the engine, synthetic oil serves the same primary function as any oil: it lubricates moving parts to reduce friction and wear. However, its uniform molecular size ensures a smoother flow, which is particularly advantageous in extreme temperatures.

Advantages Of Synthetic Oils in Engine Applications

Synthetic oils provide several benefits over their conventional counterparts:

• Temperature Resistance: Synthetic oil performs well in both high and low temperatures.
• Longevity: One of the benefits of synthetic oil is longer oil change intervals compared to conventional oil.
• Efficiency: With less internal friction from the oil, you might notice a slight increase in fuel efficiency.

The Role of Additives in Synthetic Motor Oils

Just like conventional oils, synthetic motor oils contain additives. These additives help in various ways— from preventing rust to reducing foam and maintaining viscosity. What sets synthetic oils apart is that their base stock is of higher quality, allowing for better performance than conventional oils or synthetic blends.

Synthetic vs. Conventional Oil

Major Differences Between Full Synthetic and Conventional Oil

Conventional motor oil, also known as regular or mineral oil, is a lubricant derived from refined crude oil, whereas synthetic motor oil is a man-made lubricant consisting of artificially modified chemical compounds.

Let’s dive straight in and look at the differences between synthetic and conventional oil:

• Viscosity: Viscosity measures how easily oil flows. Due to its stable viscosity, synthetic oil more consistently maintains its thickness across various temperatures, including both hot and cold conditions.
• Additives: While both oils contain additives, synthetic ones often have more advanced components. These offer better engine protection and performance. 
• Longevity: Synthetic oil offers longer oil change intervals, making it last longer in your engine. This means you may pay more upfront, but you’ll likely save money in the long run due to fewer oil changes.
• Cost-Effectiveness: Price shouldn’t be the only factor when choosing oil. Synthetic oil is generally more expensive upfront, but its long-lasting nature can offset the initial cost. Conventional oil is cheaper but usually needs replacing more often.
• Environmental Impact: Here’s something you might not have considered—synthetic oil is often engineered to be more biodegradable, whereas conventional oil is less friendly to the environment because it comes directly from crude oil.

Why Synthetic Oil Is Considered Better for Your Engine Than Conventional Oil

Synthetic oil is often viewed as the better option for your engine due to its enhanced properties. Its uniform molecular structure means less friction, leading to improved wear protection and potentially better fuel efficiency. Additionally, synthetic oil resists sludge formation more effectively than conventional oil, helping to keep your engine clean.

While synthetic oil may initially come with a higher price tag, the investment often pays off in the long run. Not only does it usually require fewer oil changes, but it also performs better in extreme temperatures and conditions. So, even though it costs more upfront, the extended oil change intervals and better overall engine care make synthetic oil a cost-effective choice for many drivers.

Situations Where Conventional Oil Could Be More Suitable

In certain situations, conventional oil may be more suitable than synthetic oil. Here are some scenarios where you might consider using conventional oil:

• Vintage Vehicles: Older vehicles, especially those with high mileage, can benefit from conventional oil. The consistency of conventional oil provides better lubrication for aging engines, which can be crucial for vintage models.
• Budget: Conventional oil is usually cheaper upfront if cost is a major concern. While you may need more frequent oil changes, you’ll save on the initial cost each time.
• Owner’s Manual Recommendation: Always check your vehicle’s owner’s manual for oil specifications. If the manufacturer specifically recommends conventional oil, it’s best to stick with that guideline.

While synthetic oil has benefits, conventional oil has its own advantages. Always consider your vehicle’s specific needs and consult the owner’s manual before making your final decision.

Types of Synthetic Oil

When it comes to engine maintenance, choosing the right type of oil is essential. The maintenance section of your owner’s manual is the first place you should always look when making this decision. There, you’ll find out whether the use of synthetic oil is suitable or recommended for your vehicle.

Not all synthetic oils are created the same. Synthetic oils come in various forms to cater to different vehicle needs. Let’s break down the major types to help you decide which one is right for your next oil change.

Full Synthetic Motor Oil

Full synthetic motor oil provides some of the best performance enhancements for your engine. Here’s why:

• Oxidation and Thermal Stability: Can withstand high temperatures without breaking down.
• Low-Temperature Flow: Offers better protection during cold starts.
• Enhanced Wear Protection: Forms a strong fluid film that minimizes engine wear.
• Extended Service Life: Longer oil change intervals compared to conventional oil.

Synthetic Blend Motor Oil

If you’re looking for a middle ground between conventional and synthetic oils, synthetic blend motor oil is a good option. Its key features include:

• Better Protection: While it doesn’t deliver the best protection, it offers an extra layer of defense against engine wear, earning it a “better.”
• Temperature Performance: Works well in both hot and cold conditions.
• Cost-Effectiveness: Generally cheaper than full synthetic, making it an affordable choice for improved engine protection.

High-mileage Synthetic Oil

For vehicles with high mileage—typically over 75,000 miles—or older engines, high-mileage synthetic oil might be the best pick. Here’s what it brings to the table:

• Reduced Leaks: Contains seal conditioners to help prevent leaks.
• Wear Protection: Provides an extra layer of protection for aging engines.
• Prolonged Engine Life: Helps maintain engine performance for a longer period.

What Type of Synthetic Oil is Right For Me?

Your choice of synthetic oil is influenced by factors such as your vehicle’s age, mileage, and manufacturer recommendations. Each type of synthetic oil offers benefits, and the most suitable one for you might differ based on your specific needs. Always consult your owner’s manual or seek professional advice if you need help deciding what to choose.

So, the next time you’re searching for an oil change near me or considering a drive-thru oil change, keep these synthetic oil options in mind. Knowing the difference between synthetic and conventional oils can help you make an informed decision, potentially extending the life of your engine and saving you money in the long run.

Synthetic Oil Grades and Quality

Understanding synthetic oil grades and quality can help you make better decisions when it comes to maintaining your vehicle’s performance and longevity. Let’s take a closer look at viscosity grades, API service classifications, and performance specifications.

Viscosity Grades

The viscosity of motor oil is a key determinant of its flow characteristics at different temperatures. Here’s what you need to know:

• SAE Scale: Developed by the Society of Automotive Engineers, this scale classifies oil viscosity.
• XW-XX Format: The number before the “W” (winter) indicates the oil’s flow at zero degrees Fahrenheit. The numbers after represent viscosity at 100 degrees Celsius.
• Importance: The correct viscosity grade ensures the oil flows adequately in both hot and cold conditions, providing optimal engine protection.

API Service Classifications

The American Petroleum Institute (API) gives each oil a service rating indicated by the “Service Symbol Donut” on the label. Here are key points:

• Gasoline vs. Diesel: API categories are different for gasoline and diesel engines. The latest categories usually incorporate the qualities of earlier ones, but not always.
• Label Information: Always check this symbol to make sure the oil meets quality and performance standards for your specific engine type as specified in your owner’s manual. 

Performance Specifications

Performance specifications are often defined by organizations like the International Lubricant Specification Advisory Committee (ILSAC) and the European Automobile Manufacturers’ Association (ACEA).

• Levels and Types: These define the oil’s performance level, suitability for diesel or gasoline engines, and compatibility with manufacturer recommendations.
• Reputable Brands: Make sure to choose a brand that adheres to these specifications for the best results.

Why Grade and Quality of Synthetic Oil Matters

Selecting the right grade and quality of synthetic oil is not just a detail—it’s a decision that affects your engine’s longevity and performance. An unsuitable choice can lead to engine damage over time, emphasizing the need for regular oil changes based on your vehicle’s recommendations. If you’re wondering why do you need an oil change or what happens if you don’t get your oil changed, know that using the right oil is key to avoiding such questions.

So, the next time you’re considering a 10-minute oil change near me, keep these factors in mind. It’s about more than just getting the job done quickly. It’s about making informed decisions to benefit your vehicle in the long run.

Best Practices for Switching to Full Synthetic Oil

Switching from conventional to full synthetic oil is acceptable and even recommended, including in older high-mileage vehicles. Here are some best practices to follow when making the transition:

• Check your vehicle’s owner’s manual: Make sure your vehicle is compatible with synthetic oil and follow the manufacturer’s recommendations for oil type and viscosity grade.
• Flush the engine: Consider flushing it before switching to synthetic oil to remove contaminants and ensure the new oil performs at its best.
• Check for Leaks: Inspect for any leaking seals before the oil change to avoid potential issues with synthetic oil.
• Monitor Oil Consumption: Be aware that synthetic oil may lead to increased oil consumption in some vehicles. Monitor oil levels and top up as needed.

Making the Transition From Conventional to Using Synthetic Oil

When transitioning from conventional to synthetic oil, it’s crucial to follow the manufacturer’s guidelines and consider the following:

• Choose the right oil: Pick a synthetic oil that meets your vehicle’s requirements, such as viscosity grade, API service classification, and performance specifications.
• Check for Leaks: As before, inspect for any leaking seals before the oil change to avoid potential issues.
• Monitor Oil Consumption: Keep an eye on oil levels, as synthetic oil might cause increased consumption in some vehicles.

Considerations Before Performing an Oil Change to Fully Synthetic Motor Oil

Before you switch to fully synthetic motor oil, here are some important considerations:

• Compatibility: Verify your vehicle’s compatibility with synthetic oil and adhere to the manufacturer’s oil type and viscosity grade guidelines.
• Quality: Opt for a reputable brand to ensure the oil’s quality and effectiveness.
• Performance: Choose an oil that satisfies your vehicle’s needs, from viscosity grade to API service classification.
• Oil Consumption: Just like before, monitor your oil levels, as synthetic oil can sometimes lead to increased consumption.

By adhering to these best practices and considerations, you’ll ensure a smooth and beneficial transition to synthetic oil for your vehicle.

Take Action for a Healthier Engine

Understanding the value of synthetic oil is a concrete step toward proactive vehicle maintenance. There is no need to think about how to tell if the engine is damaged from no oil if you’re keeping up with recommended oil changes and using high-quality products. If you’re pondering a switch to synthetic oil, you’re already on a path to a longer-lasting, more efficient engine. But remember, the owner’s manual is your go-to source for recommended types of motor oil and maintenance schedules. Make the informed choice—your vehicle will thank you.